Grip bond Pro Hybrid Sealant and Adhesive is a waterproof construction adhesive and sealer, for use with stone, concrete, mirrors and natural stone.

A one part, high quality, high modulus sealing and bonding material based on advanced hybrid polymer technology. A totally neutral “hybrid” sealant for use in areas requiring a tough elastic rubber joint or as an adhesive with superior bonding strength. Conforms to EN 15651‐1: 2012.

Product Details: 

• Brand: Bond IT 
• Colour: White
• Size: EU3 Plastic Cartridge
• Curing in: 24 hours 2.5mm
• Shrinkage: Nil
• Skinning Time: approx. 10 minutes
• Hardness Shore A (DIN 53505): 45+/-4
• Temperature Resistance: -30oC to +95oC
• Application Temperature: +5oC to +40oC
• Storage Temperature: +5oC to +25oC
• Elongation To Break: 60%
• Density: 1.5
• Tensile Strength: 1.9N/mm2
• UFI: 6030-10UD-K008-7VHD
• Product SKU: BDMSPWH  
• Product Code: 5060021364784  

Key Features:

• High modulus, remains permanently flexible.
• For sealing and bonding interior and exterior applications in all weather.
• Can be overpainted with water based paints.
• Non shrinking.
• Contains no isocyanates, solvents, silicone and phthalates.
• Rapid curing.
• Excellent adhesion to most surfaces (even moist surfaces).
• Wet on wet application.
• No odour.

Uses: 

• Bond It GRIPBOND PRO can be used for filling and sealing of connecting joints, cracks, holes, etc in the building sector.
• For bonding metal to metal (can absorb vibration).
• As a universal waterproof construction adhesive for bonding concrete, mirrors (note: not suitable for plastic backed/safety mirrors), gypsum board, polycarbonates, polystyrene, PVC, many plastics, ceramics, copper, lead, zinc, aluminium, stainless steel, wood and glass. We recommend that test areas be carried out prior to application to ensure compatibility of materials.

Limitations:

This product is not recommended for use with expansion joints or for installations where the joints are continually immersed in water. Note: if allowed to cure in dark conditions or poor light the product may yellow. This product is not for use in aquariums. Note: not suitable for use on LSE plastics such as PE, PP and PTFE.

This product may cause staining on marble and other stone surfaces. This can be avoided by using a sealer prior to application of GRIPBOND PRO.

Do not use for bedding in double glazed units, for this application we would recommend our LN7 silicone.

Do not use on surfaces that bleed oils or plasticisers.

Paintability: as quality and type of paint can vary, always test compatibility before use but we only recommend use of water based paints with this product.

Any mirror made with 6mm glass or thicker needs mechanical fixing. Any mirror on a sloping wall or ceiling must have mechanical fixings. Any mirror greater than 1m2 must have mechanical fixings.

Preparation:

Ensure all surfaces are clean and free from grease, oil or any other contaminants that may hinder adhesion.

Application:

Carefully cut the top of the cartridge taking care not to damage the threaded area. Screw on the nozzle supplied and cut at an angle approximately 45o. Apply using a standard sealant gun.

As an adhesive: apply in beads or strips and bond the surfaces together carefully and allow to cure.

As a sealant: apply in a continuous bead along the aperture and leave to fully cure. Smooth the joint by tooling with a soapy solution using Bond It SEALANT APPLICATOR TOOL.

Remove any excess material and clean tools immediately with WHITE SPIRIT. Replace plastic cap after use.

Coverage:

Depending upon substrate condition and porosity the approximate coverage rates will be approximately 1m2 per cartridge.

 Technical Details: 

https://www.mybuildingsupplies.uk/s/files/1/0786/5247/3674/files/BDMSPWH-GB_Pro-TDS.pdf?v=1707912560